Last Modified: 11-29-2007 1.6 A
Service Category: Brake Section: Brake System
Model Year: 2008 Model: Sequoia Doc ID: RM000001Q8I00GX
Title: BRAKE SYSTEM (OTHER): BRAKE PEDAL: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

2. REMOVE COWL SIDE TRIM BOARD LH INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL (2008 Sequoia)+

3. REMOVE INSTRUMENT SIDE PANEL LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

4. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: REMOVAL (2008 Sequoia)+

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD INSERT INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: REMOVAL (2008 Sequoia)+

7. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

(a) Remove the bolt and air duct.

8. REMOVE PUSH ROD PIN

(a) Remove the clip and push rod pin from the brake pedal lever.

9. REMOVE STOP LIGHT SWITCH ASSEMBLY LIGHTING (EXT): STOP LIGHT SWITCH: REMOVAL (2008 Sequoia)+

10. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Remove the stop light switch mounting adjuster.

11. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY

(a) Remove the brake pedal return spring.

(b) Remove the bolt from the No. 3 brake pedal bracket.

(c) Remove the bolt, nut and No. 3 brake pedal bracket from the brake pedal support.

(d) Remove the 4 nuts and brake pedal support.

12. REMOVE BRAKE PEDAL PAD

(a) Remove the brake pedal pad.